AN82.61-P-0001-07TX Retrofit Audio Gateway Control Unit

AN82.61-P-0001-07TX Retrofit Audio Gateway Control Unit







1 Fasten audio gateway control unit (N93/1) using two nuts (5) to bracket (2).
2 Place fan (3) onto bracket (2) and fasten using two nuts (4).
3 Connect black, 14-pin coupling (6) from auto pilot system wiring harness (1) to audio gateway control unit (N93/1).
4 Connect black, 4-pin plug from auto pilot system wiring harness (1) with black, 4-pin coupling (7) of fan wiring harness (3).
5 Connect black, 4-pin plug (8) of fan wiring harness (3) to audio gateway control unit (N93/1).
6 Connect black, 6-pin MOST coupling (11) from auto pilot system wiring harness (1) to audio gateway control unit (N93/1) (see magnifying glass).
7 Attach auto pilot system wiring harness (1) using given cable strap holder on bracket (2) (see arrow).
8 Attach auto pilot system wiring harness (1) and fan wiring harness (3) as shown in the picture.

Make sure that both wiring harnesses are routed such that they do not chafe or make any noise.

9 Place bracket (2) with audio gateway control unit (N93/1) onto left rear wheelhouse.
10 Fasten bracket (2) using nut (9) and bolts (10).