AR32.25-P-1018-01TX Install Support Ring on Damper

AR32.25-P-1018-01TX Install support ring on damper
- except CODE (489) Airmatic (semi-active air suspension)

Commercially available tools:

Component Identification:

The washer (3c), bushing (3d) and spring cup (3e) must be mounted on the damper (2).

1 Measure dimension (M) from the center of the hole in the lower fork to spring contact surface on spring cup (3e) on old damper (2).
2 Install support ring (3a) on new shock absorber (2) with dimension identical to measured dimension on old shock absorber (2).

Do not overstretch support ring (3a).