AN82.61-P-0001-06TAF Retrofit MOST Fiber Optic Cable Wiring Harness

AN82.61-P-0001-06TAF Retrofit MOST Fiber Optic Cable Wiring Harness
- with CODE (523) MB Audio 20 radio

1 Push the catch hook (arrow A) of ordered Media Oriented System Transport (MOST) fiber optic cable (8) outward a little and pull the black 2-pin MOST coupling (14) out of the MOST coupling housing (11).
2 Remove blue retaining clip (15) from black 2-pin MOST coupling (14).

It must be ensured that the fiber optic cable (MOST ) (8) is installed in contact cavity 1 (input) (arrow B). If this is not the case, insert fiber optic cable (MOST) (8) from contact cavity 2 into contact cavity 1.







3 Remove MOST coupling of on-board fiber optic cable (MOST) (7) from black 6-pin coupling housing (9) of auto pilot system wiring harness (1).







4 Remove blue retaining clip (15) from black 2-pin MOST coupling (13).
5 Release catch hook and remove fiber optic cable (MOST) (7) from contact cavity 2 (output) (arrow B) of black 2-pin MOST coupling (13).
6 Install fiber optic cable (MOST) (7) in contact cavity 2 (output) of black 2-pin MOST coupling (14).







7 Install blue retaining clip (15) into the black 2-pin MOST coupling (14).
8 Clip black 2-pin MOST coupling (14) into MOST coupling housing (11).

MOST coupling (11) is connected later to the CD changer.
Wrap felt tape around on-board MOST coupling (no longer required) for CD changer and strap down in center console.







9 Insert free end of fiber optic cable (MOST) (8) into contact cavity 2 (output) (arrow B) of black 2-pin MOST coupling (13).
10 Install blue retaining clip (15) into the black 2-pin MOST coupling (13).







11 Install MOST coupling (13) of fiber optic cable (MOST) (7) in black 6-pin coupling housing (9) of auto pilot system wiring harness (1)