AZ82.70-P-0001-04TT Retrofit Wiring Harness

AZ82.70-P-0001-04TT Retrofit Wiring Harness
- except CODE (450) Taxi version
- except CODE (979) Special protection version


1 Prepare wiring harness as shown in figure.

Component Identification:

2 Open rear SAM control unit with fuse and relay module (N10/2) and expose plug positions 20 and 28.
3 Insert relay from parts kit in plug position C.
4 Assemble fuses (5 and 14) with 7.5 A fuse.







5 Connect adapter wiring harness (2) to the connection line (1) using one of the white voltage supply couplings (3).

Insulate and strap down the second white coupling (4) (not required).

6 Connect black voltage supply coupling (6) to plug position 27 of the rear SAM control unit with fuse and relay module (N10/2).
7 Insert flat plug bushing (20) at plug position 20 of the rear SAM control unit with fuse and relay module (N10/2) into chamber 1.

Component Identification:

8 Route wiring harness (1) along existing lines at the left of the side wall. Connect ground of left wheelhouse in luggage compartment (W6).







9 Fasten black coupling for video systems (5) of the wiring harness (1) under the rear seat using self-adhesive felt (arrow) according to figure.