Procedures

BT42.20-P-0510-01A Parking brake pedal assembly modified

Component Identification:

Modified pedal assembly
Phased in as of approx. 09/2002 a modified design of parking brake pedal systems (1) have been fitted.

The new version of the pedal assembly (1) has a pulled notch (2a) instead of a pushed notch (2b) as previously.

This results in different values for the adjustment of the parking brake.

On account of the successive production launch and the possibility that in the case of repair, that old replaces new or new replaces old, on each vehicle, the version of the pedal assembly (1) is determined before the parking brake is adjusted.

Component Identification:

The new and previous version can be distinguished by the position of the shaft journal (3) in the pedal lever (4). Moreover the notches (2a, 2b) differ in color.