Output Yoke: Service and Repair

AR27.50-P-0620-02R Remove/install output flange
- TRANSMISSION 716.6 [model 230]
- TRANSMISSION 722.6 [models 211, 230]

Modification Notes:

Manual Transmission Complete:

Gear Assembly:

Special Tools:

Remove output flange

Component Identification:

1 Counter-hold output flange (1) using pin wrench (07).
2 Unscrew twelve-point nut (2) from output shaft (3) using socket wrench bit.

Replace twelve-point nut (2).

shown on model 230

Component Identification:

3.1 If output flange (1) is stuck, use puller (08).

Install output flange
4 Push output flange (1) onto output shaft (3).
5 Counterhold output flange (1) using pin wrench (07) and tighten twelve-point nut (2) using socket wrench bit.

shown on model 230

Component Identification:

6 Secure twelve-point nut (2) by hammering the collar into the groove (arrow) of the output shaft (3) using an assembly punch.

Do not use a chisel punch or chisel.

shown on model 230