AN82.60-P-0016-01SX Retrofit Media Interface Control Unit

AN82.60-P-0016-01SX Retrofit Media Interface Control Unit

1 Fold back floor covering (3) in front passenger footwell.
2 Unscrew nuts (2) and fold back footrest (1).







3 Unscrew nut (5) from bracket (4)

Only if bracket (4) is installed.

4 Detach shackle (arrow) at bracket (4) and remove bracket (4).

Only if bracket (4) is installed.

5 Detach carrier (6) of electrical connectors from bracket (4).

Only if bracket (4) is installed.







6 Position media interface control unit (N125/1) on vehicle's own bracket or bracket contained in delivery contents (4) and tighten with nuts (7).







7 Install carrier (6) of electrical connectors at bracket (4).
8 Position media interface control unit (N125/1) with bracket (4) in vehicle.
9 Tighten nut (5) at bracket (4).
10 Bend shackle that is located beneath arrow at bracket (4) downwards slightly.