GF83.55-P-2100-03R Refrigerant Compressor, Design

GF83.55-P-2100-03R Refrigerant Compressor, Design

Design
^ A total of seven pistons (6) are arranged at equal spacings around its circumference and connected by sliding shoes (11) to the swash plate (4).
^ The swash plate (4) is connected to the stop plate (12) in the crankcase (2) with two guide pins (3) and flexibly mounted on the refrigerant compressor shaft (13).
^ The stop plate (12) and belt pulley (1) are stuck to the refrigerant compressor shaft (13).
^ The externally-controlled refrigerant compressor control valve (8) for adjusting the swash plate (4) is located in the rear housing section.







Belt pulley, design
The hub (1) is permanently connected to the refrigerant compressor shaft and via the rubbers (2) to the belt pulley (3).