K. Version Coding

1. Connect Star Diagnosis to the vehicle.

2. Set the MOST ring configuration to match Figure 30 via path:

Control units> Information and communication > Audio, video, navigation and telematics > AGW - Audio Gateway> Retrofitting of MOST components or iPod > Retrofitting of MOST components > F2: Restart of optical ring > F2: Actual configuration > Verify that the configuration of the MOST components matches Figure 30 > F2: To continue > F3: Yes, to write the current actual configuration to MOST master> F2: Erase fault memory

Note:
The MOST ring configuration in Figure 30 is an example of a configuration including all components. Some installations will not include all the components shown in the example. If a component is not present, connect the preceding component to the component following the one not present.

NOTICE!
Match the MOST ring configuration to Figure 30.

Failure to match the MOST ring configuration to Figure 30 will result in erroneous system operation and/or intermittent malfunctioning of some or all components.

DO NOT alter the configuration in Figure 30 to match the vehicle configuration.

3. Set the Tele Aid control module to recognize presence of the telephone via path:

Control units > Information and communication > Audio, video, navigation and telematics > TELE-AID > Control unit adaptations > Model series, telephone adapter for portable CTEL (UHI) > Set "Model series" to R171, Set "Telephone adapter" to FITTED, press F5 > F3: Yes/Coding > F2 to confirm the coding was carried out

4. Set the instrument cluster in accordance with STAR Bulletin P-B-54.301141, Instrument Cluster SCN Coding for Component Replacement or Dealer Installed Accessories" to recognize presence of the cellular telephone control module.

5. Check the DTC memory of all installed components and the head unit. Investigate and identify any present DTCs. Once identified, correct the source of the DTCs and clear the DTC memory.

Note:
Powering up the newly installed system prior to version coding will set errors in the MOST ring configuration. Ignore these errors during the initial DTC check. If the DTC return after clearing, a configuration error is present. Locate and correct the error.

6. Confirm no new DTCs are present in the MOST system group.