GF82.30-P-4006CW Wiper system automatic speed reduction, function

GF82.30-P-4006CW Wiper System Automatic Speed Reduction, Function
- except CODE (494) USA version


Function requirements
^ C. 15R On
^ Combination switch (S4) in position "2", "3", or "4"
^ Wiper system in working order

Automatic speed reduction function sequence
The circuit status is transmitted by the electronic ignition lock control unit (N73) to the front SAM control unit with fuse and relay module (N10/1) via chassis CAN.
The speed is transmitted by the instrument cluster (A1) to the front SAM control unit via interior CAN.

If the speed of the vehicle is reduced from v > 6 km/h to below v = 3 km/h, the front SAM control unit switches back the wiper motor (M6/1) one speed via wiper/inside rearview mirror LIN.

Function abort:
The speed reduction is canceled by turning the combination switch to another position or by operating the touch wiping or washing functions.
If the value of approx. v = 6 km/h is exceeded again as the vehicle speed increases, the front SAM control unit automatically switches the wiper motor back to the wiper speed set on the combination switch.