GF82.62-P-3006SXJ TV Antenna Selector Component Description

GF82.62-P-3006SXJ TV Antenna Selector Component Description
- with CODE (498) Japan version

Component Identification:

Location
The TV antenna selector is installed behind the C-pillar in the left side of the trunk.

Task
Antenna signals TV1 to TV4 are picked up, amplified and relayed to the TV antenna selector by the rear window antenna amplifier module (A2/12). The best TV signal is relayed to the COMAND controller unit (A40/3) from here. The TV antenna selector is switched via 2 inputs by switching voltages from the COMAND controller unit.