GF72.29-P-3012Q Power Window Comfort Closing Via Keyless Go, Function

GF72.29-P-3012Q Power Window Comfort Closing Via Keyless Go, Function
- with CODE (889) Keyless go


Function requirements
^ No circuit switched on
^ Windows normalized
^ All doors closed
^ Central locking locked

Function
When the lock button on the left door handle switch (S17/19) or right door handle switch (S17/21) are actuated and held down, the windows can be closed Closing of the windows correspond to manual closing
The closing request is relayed to the EIS control module (E73) by the
^ left door handle switch (S17/19) via left door keyless go control module (N69/8) or by the
^ right door handle switch (S17/21) via right door keyless go control module (N69/9)

The EIS control module (N73) serves as gateway between the keyless go data line and the CAN class B bus.

The information is then transmitted to the left door control module (N69/1) via CAN class B bus, which then relays the locking request to the left front power window motor (M10/3). The closing requests for the right front power window motor (M10/4) is transmitted to the right door control module (N69/2) via CAN class B bus which then initiates actuation
The closing requests for the left rear power window motor (M10/5) and right rear power window motor (M10/6) are transmitted to the rear control module (N22/6) (on model 209.3) or power soft top control module (on model 209.4) via CAN class B bus, which then initiates actuation

Comfort opening of the side windows via keyless go is not possible
If the left door handle switch (S17/19) or right door handle switch (S17/21) is released and reactuated while closing the windows via keyless go, the windows are actuated in the opening direction for 2 s
This function serves as obstruction sensor