AZ82.70-P-0001-04T Retrofit Wiring Harness

AZ82.70-P-0001-04T Retrofit Wiring Harness

1 Prepare portable cellular telephone wiring harness (2) as shown in figure

Component Identification:

2 Attach control module FSE (3) to CTEL wiring harness (2) and stick control module behind glove box using 2-sided adhesive tape as illustrated.







3 Uncover tied-back antenna line (ANT) and connection (VDA) to right A-pillar and route beneath glove box. Attach connector (VDA) to CTEL wiring harness.







4 Attach CTEL (1) holder cable to wiring harness (2). Also attach CTEL (1) holder antenna cable.
5 Route cable behind right air duct (arrow) and fix in place using adhesive felt.







6 After installing telephone console (12) attach CTEL holder (1) and lead helix cable out along underside of telephone console (arrow).