Radio, Stereo, and Compact Disc: Service and Repair

AR82.60-P-7605TA Remove/Install Audio Components Center

Shown On Vehicle With Code (890) Automatic Rear-end Door:

1 Disconnect ground cable of battery
2 Remove left side inner paneling of load compartment
3 Remove left side paneling in rear
4 Unscrew nuts (1)
5 Remove housing hydraulic unit (2) and place to one side
6 Disconnect electric connectors (3) from audio gateway control module (N93/1)
7 Detach fiber optical cable connector from audio gateway control module (N93/1)

CAUTION: Do not kink or stretch fiber optical cable, risk of causing damage.

8 Cover fiber optic cable
9 Unscrew nuts (5)
10 Slide bracket (6) with audio gateway control module (N93/1) backwards until the nuts (7) are accessible
11 Unscrew nuts (7)
12 Push bracket (6) to one side and slide the audio gateway control module (N93/1) backwards until the electrical connectors (8) are accessible
13 Disconnect electric connectors (8) from audio gateway control module (N93/1)
14 Remove audio gateway control module (N93/1) backwards out of side panel
15 Install in the reverse order