Dome Lamp: Service and Repair

AR82.20-P-0113T Remove/Install Rear Dome Lamp
- except CODE (413) Panoramic sliding roof [model 211.0]

Shown On Model 211.0:

1 Disconnect ground cable of battery
2 Remove rear interior lamp (E15/3) using mounting wedge from headliner (1)

CAUTION: Remove rear interior lamp (E15/3) carefully, as flat cable may be damaged.

See "Special Tools" given below.

NOTE: Installation: Make sure that the catch hook (2) latches into the notch (3).

3 Disconnect electrical connector (4)

CAUTION: Carefully disconnect electrical connector (4) as flat cable could be damaged.

4 Install in the reverse order
5 Perform function check

Special Tools

Assembly Wedge, P/N # 110 589 03 59 00: