GF00.20-P-0004-02SX Active Service System (ASSYST Plus), Driver Information

GF00.20-P-0004-02SX Active Service System (ASSYST PLUS), Driver Information

Shown on model 221.056 up to 31.8.06

Adjustment possibilities of the exhaust emissions inspection date







The driver can read out the due date of the main inspection (HU) and the exhaust emissions inspection (AU) at any time. If required, the new due date can be entered after a main inspection or an exhaust emissions inspection has been performed.

Shown on model 221.056 up to 31.8.06

Adjustment possibilities of the main inspection date







This data can be viewed and changed at any time.

Shown on model 221.056 up to 31.8.06

Customer level







The Active Service System PLUS (ASSYST PLUS) is divided into two different levels. On the one hand, the customer level is available to the customer, providing him/her information on service that is due. On the other hand, the service level is available to the service staff, which provides information both on the service scope and date as well as on further special work.

Shown on model 221.056 up to 31.8.06

Workshop level







They can also be read out on the workshop level using the workshop code, which encodes all of the service work, and entered into the Workshop Information System (WIS). The workshop code can be re- coded into a maintenance schedule in the WIS.

Shown on model 221.056 up to 31.8.06

Submenu item in the ASSYST PLUS







Shown on model 221.056 up to 31.8.06







The submenu items listed above are available in this form and sequence to most vehicles.

Shown on model 221.056 up to 31.8.06







Sometimes, the menu item "Oil measurement" can be available depending on the engine version. The only decisive factor for this is the oil level measurement method.

Shown on model 221.056 up to 31.8.06

Message before service is due







The service date is calculated by the ASSYST PLUS, which is accommodated in the central gateway control unit (N93). The service data are administered by the ASSYST PLUS and transmitted to the instrument cluster (A1) via the central CAN.

Shown on model 221.056 up to 31.8.06

Message after service is due







The service that is due continues to be administered when the calculated due date is exceeded and displayed in the multifunction display (A1p13).

Shown on model 221.056 up to 31.8.06

Selection from the service scope







It is possible to view in the submenu item "Service scope", which services have to be performed.

Shown on model 221.056 up to 31.8.06

Display of the workshop code







They can also be read out on the workshop level using the workshop code, which encodes all of the service work, and entered into the WIS. The workshop code can be re-coded into a maintenance schedule in the WIS.

Shown on model 221.056 up to 31.8.06

Failure of ASSYST PLUS







Whenever an entry is made or an activity is confirmed, the ASSYST PLUS checks whether it was performed properly.

Shown on model 221.056 up to 31.8.06

Incorrect entry during service confirmation







The driver is notified of a failure of the ASSYST PLUS.

Shown on model 221.056 up to 31.8.06

ASSYST PLUS calculates the remaining brake lining thickness







Shown on model 221.056 up to 31.8.06

Submenu item for the engine oil request







Shown on model 221.056 up to 31.8.06

Oil level above minimum







Shown on model 221.176 up to 31.8.06

Oil level above maximum