GF82.70-P-2014RB Short Message Service (SMS), Function

GF82.70-P-2014RB Short Message Service (SMS), Function
- with CODE (386) Preinstallation for telephone "Handy", UPCI system
- with CODE (388) Telephone "Handy", UPCI system


The Universal Portable CTEL Interface (UPCI [UHI]) control unit (N123/1) recognizes, when a new Short Message Service (SMS) message is received on each portable CTEL (A34/6) and then sends this to the COMAND operating, display and control unit (A40/3) where it is then displayed.
In the COMAND operating, display and control unit (A40/3) the received and transmitted SMS messages are sorted according to their status into the "read", "unread" and "sent" lists. The user also has the option at any time to delete SMS messages that are no longer required.

The user can also compile his/her own SMS messages and send them via the respective portable CTEL (A34/6). The parameters for sending an SMS message such as, e.g. service provider no. or memory time is provided here by the COMAND operating, display and control unit (A40/3) itself. If no parameters are stored, the parameters of the particular portable CTEL (A34/6) are used. If a fault occurs during an SMS action, e.g. cellular mobile telephone network not available or the respective portable CTEL (A34/6) is not plugged in, this is then notified to the user by the Universal Portable CTEL Interface (UPCI) system with a corresponding error message.