AR80.35-P-0001R Remove/Install Keyless GO Control Module

AR80.35-P-0001R Remove/Install Keyless GO Control Module
- with CODE (889) Keyless Go
- except CODE (P99) Special model "AMG Black Series"







DANGER:
- Risk of explosion from gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury from caustic burns to eyes and skin from battery electrolyte or from handling damaged lead-acid batteries
- No fire, sparks, open flames or smoking. Wear add-resistant gloves, clothing and eye protection. Pour battery electrolyte only into suitable and appropriately marked containers.

1 Disconnect ground cables at both batteries

NOTE: First of all, the on-board electrical system battery in trunk, then the starter battery in engine compartment.

2 Remove left side trim in trunk
3 Separate electrical connector at Keyless Go control module (N69/5)
4 Unscrew screws (1) and take off Keyless Go control module (N69/5)
5 Install in the reverse order
6 Read out fault memory
7 Download basic data from STAR DIAGNOSIS