AR33.15-P-0170-01R Pressing Track Control Arm From the Stub Axle Assembly

AR33.15-P-0170-01R Pressing track control arm from the stub axle assembly
Puller for pressing spring control arm out of steering knuckle.

Wheel Location, Hub:

Special Tools:

Component Identification:

1 Unscrew self-locking nut of spring control arm (17) at steering knuckle (5).
2 Screw the thrust washer (044a) onto the carrying joint.
3 Apply the puller (035).

Puller (035) for model 220 589 00 33 00 211, 230 without code (P99) Special model "AMG Black Series")

Illustrated on model 230.476

4 Use the press (064) to press the spring control arm (17) out of the steering knuckle (5) by turning the press spindle. Only model 211, 230 without code (P99) Special model "AMG Black Series".

Do not damage the rubber boot on the supporting joint when pressing out.