AZ82.60-P-0015-01CW Retrofit Rear Entertainment Control Unit

AZ82.60-P-0015-01CW Retrofit Rear Entertainment Control Unit
- except CODE (864) Rear entertainment system


1 Bond felt tape onto video control unit (1).

The side of the video control unit (1) with the mounting brackets is not bonded.







2 Glue down video control unit (1) at lower cross strut (22) of seat frame with velcro strip (21).

The bonding areas must be free of dust and grease in order to prevent adhesion problems.







Only perform the following operation steps on vehicles with code (275) Memory package (driver seat, steering column, mirrors).

3 Bond felt tape onto control unit (2).

Do not bond the bottom of the control unit (2).







4 Fasten control unit (2) at upper cross strut (22) using velcro strip (21).

The bonding areas must be free of dust and grease in order to prevent adhesion problems.