AZ82.80-P-0003-07CW Make Cutout For Tablet PC Mount Bracket

AZ82.80-P-0003-07CW Make Cutout For Tablet PC Mount Bracket
- MODEL 204.0## /2## /9## 1#

The following operation steps are shown on the right side of the vehicle and can be accomplished analogously on the left side of the vehicle.






1 Cut out cutting template (11) along broken line.
The cutting template (11) is included in the installation kit.






2 Apply cutting template (11) to head restraint and mark separating point (broken line).
3 Remove cutting template (11).






4 Carefully cut seat cover using a knife and fix shackle (12) in place using adhesive tape (13).
5 Work out and remove foam core.
6 Work out seat core until cross strut (14) of seat is accessible.
7 Fold shackle (12) into opening.