GF82.61-P-0001-08CE Auto Pilot System (APS) Operating Description
GF82.61-P-0001-08CE Auto Pilot System (APS) Operating Description
- with CODE (525) MB Audio 50 APS radio
- with CODE (511) Audio 50 APS with DVD changer
General
The Auto Pilot System (APS) can be operated with the following controls:
- Control buttons on radio with Auto-Pilot-System (A2/56)
- Audio/COMAND control panel (A40/9)
- Left multifunction steering wheel button group (S110) and right multifunction steering wheel button group (S111)
- Voice control system (VCS) (with code (511) Audio 50 APS incl. DVD changer)
These operating instructions consist of the following subfunctions:
^ Menu "Radio"
^ Menu "Disc"
^ Basic function 6 disc DVD changer (with code (511) Audio 50 APS incl. DVD changer)
^ "NAVI" menu
^ "TEL" menu
^ System settings, model 204.0/2
^ System settings, model 204.9
^ Sound settings
Menu "Radio"
The "Radio" menu is activated using the "Radio" hardkey, the application executed last is started. If a different application is to be started, the "Radio" hardkey must be pressed repeatedly until the required menu item is selected in the "Radio" menu.
The "RADIO" menu subfunction comprises the following additional subfunctions:
^ Radio (FM/AM (SW/LW/MW))
^ Digital Audio Broadcasting (Digital Radio) (DAB) (with code (537) Digital radio)
Radio (FM/AM (SW/LW/MW))
The menu item Radio in the "RADIO" menu can be activated with the "RADIO" hardkey. The default screen appears. The following are shown on the audio/COMAND display (A40/8):
- Status line (current station frequency)
- Application field (stations currently receivable and numbers of their memory locations (station name with radio data system (RDS) or frequency)
- Function bars ("Radio", "Memory", "Info" and "Tone")
The "Radio" hardkey can be used to switch between the following wavebands:
- "FM" (UHF)
- "MW" (medium wave)
- "KW" (short wave)
- "LW" (long wave)
In the following menu items, the corresponding submenus can be called on the audio/COMAND display:
- "RADIO" menu item
- "Station list" (for FM mode or DAB mode (with code (537) Digital radio))
- "Frequency entry"
- "Fix frequency" RDS (for FM mode)
- "TA" (Traffic Announcement)
- "Memory" menu item
- "Auto memory"
- Stored station (1 to 10)
- "Info" menu item (information on current station)
- "Tone" menu item
- "Treble"
- "Bass"
- "Bal/Fad"
- "Tone" ("Logic7" on/off) (with code (810) Sound system)
DAB (with code (537) Digital radio)
The "DAB" menu item in the "RADIO" menu be activated with the "RADIO" hardkey. The default screen appears. The following are shown on the audio/COMAND display:
- Status lines (name of set ensembles, application field, currently receivable stations and number of their memory locations)
- Function bar ("DAB", "Memory", "left double arrow button" "right double arrow button" and "Tone")
In the following menu items, the corresponding submenus can be called on the audio/COMAND display:
- "DAB" menu item
- "Subprograms"
- "Station list"
- "Store station"
- "TA"
- "Memory" menu item
- Stored stations
- "Auto memory"
- Menu item "left double arrow button" "right double arrow button" (search ensemble or quit search)
- "Tone" menu item
- "Treble"
- "Bass"
- "Bal/Fad"
- "Tone" ("Logic7" on/off) (with code (810) Sound system)
Menu "Disc"
The "DISC" menu can be activated with the "DISC" hardkey. The application last executed is started. If a different application is to be started, the "Disc" hardkey must be pressed repeatedly until the required menu item is selected in the "Disc" menu. The "Disc" menu subfunction comprises the following additional subfunctions:
^ "CD" or "DVD"
^ "MP3"
^ "Media interface" (with code (518) Media interface)
^ "AUX"
"CD" or "DVD"
The "CD" or "DVD" menu item in "DISC" menu be activated with the "DISC" hardkey. The default screen appears. The following are shown on the audio/COMAND display:
- Status lines (no display)
- Application field (type of data storage device ("CD" or "DVD"))
- Function bar ("CD" or "DVD", "Track list", "Changer" (with code (511) Audio 50 APS incl. DVD changer) and "Tone")
In the following menu items, the corresponding submenus can be called on the audio/COMAND display:
- "CD" or "DVD" menu item
- "Normal track order"
- "Track mix"
- "TA"
- "AUX"
- "Track list" menu item
- "Media" menu item (selection of available sources)
- "Tone" menu item
- "Treble"
- "Bass"
- "Bal/Fad"
- "Tone" ("Logic7" on/off) (with code (810) Sound system)
"MP3"
The "MP3" menu item in the "DISC" menu can be activated with the "DISC" hardkey. The default screen appears. The following are shown on the audio/COMAND display:
- Status lines (no display)
- Application field (data storage device type (MP3), data storage type position in media list, track number, track name, track playing time, graphical time and track display, current playback option and current folder)
- Function bar ("MP3", "Folder", "Changer" (with code (511) Audio 50 APS incl. DVD changer) and "Tone")
In the following menu items, the corresponding submenus can be called on the audio/COMAND display: "MP3" menu item
- "Normal track order"
- "Folder mix"
- "Track mix"
- "TA"
- "AUX"
- "Folder" menu item
- "Media" menu item (selection of available sources)
- "Tone" menu item
- "Treble"
- "Bass"
- "Bal/Fad"
- "Tone" ("Logic7" on/off) (with code (810) Sound system)
"Media interface" (with code (518) Media interface)
The menu item "Media Interface" in the "DISC" menu can be activated with the "DISC" hardkey. The default screen appears. The following are shown on the audio/COMAND display:
- Status line (artist)
- Application field (current track number, track name, graphical time and track display, name of current album and symbol for connected medium (e.g. iPod))
- Function bar ("Media interface","Music", "Changer" (with code (511) Audio 50 APS incl. DVD changer) and "Tone")
The submenu selection depends on the active source.
In the following menu items, the corresponding submenus can be called on the audio/COMAND display:
- "Media interface" menu item
- "Normal track order"
- "Folder mix" (only with USB mass storage device if folder has been selected)
- "Track mix"
- "TA"
- "Display Meta data"
- "Category mix"
- "Music" menu item
- File selection
- Folder selection
- Category selection
- Current track list
- Alphabetical sequence
- Folder
- "Media" menu item (selection of available sources)
- "Tone" menu item
- "Treble"
- "Bass"
- "Bal/Fad"
- "Tone("Logic7" on/off) (with code (810) Sound system)
The menu guidance and representation of the connection possibilities are shown on the audio/COMAND display and depend from the corresponding connected portable multimedia terminal.
"Aux"
The "AUX" menu item can be activated in the "DISC" menu. The default screen appears. The following are shown on the audio/ COMAND display:
- Status lines (no display)
- Application field (no display, 2 speaker symbols only)
- Function bar ("AUX" and "Tone")
In the following menu items, the corresponding submenus can be called on the audio/COMAND display:
- "AUX" menu item
- "TA"
- "Volume" menu item
- "Standard"
- "Boost"
- "Tone" menu item
- "Treble"
- "Bass"
- "Bal/Fad"
- "Tone" ("Logic7" on/off) (with code (810) Sound system)
As of 1.6.09: the selection "Standard" and "Boost" are available in the "Volume" menu for the audio source Aux (via Media interface adapter cable (with code (518) Media interface) or over serial Aux socket). The "Boost" settings increases the input level.
The menu guidance and representation of the connection possibilities are shown on the audio/COMAND display and depend from the corresponding connected portable multimedia terminal.
Basic function 6 disc DVD changer (with code (511) Audio 50 APS incl. DVD changer)
The CD/DVD eject and load button is actuated. The default screen appears.
Control within the menu is possible either with the buttons on the radio with Auto-Pilot system or on the audio/COMAND control panel.
Selection possibilities in menu:
- Back (previous menu is called)
- Eject all (all CDs or DVDs loaded are automatically ejected one after another)
- Fill empty locations
- Magazine can be filled one after another
CDs or DVDs, which are rejected and not removed are automatically pulled back in.
"NAVI"menu
The "NAVI" menu item can be activated with the "NAVI" hardkey. The default screen appears. The following are shown on the audio/COMAND display:
- Status lines (no display
- Application field (display with compass)
- Function bar ("Navi", "TMC", ear symbol (only visible during navigation when navigation active) and "Destination")
In the following menu items, the corresponding submenus can be called on the audio/COMAND display:
- "Navi" menu item
- "Destination information"
- "Position"
- "Store position"
- "Geographic coordinates"
- "Current position"
- "Route list"
- "Mode"
- "Shortest route"
- "Dynamic route"
- "Fastest route"
- "Avoid freeway"
- "Avoid toll roads"
- "Avoid tunnels"
- "Avoid ferries"
- "Avid car trains"
- "Avoid roads requiring road tax sticker"
- "Traffic jam ahead" (back, less, more, delete, start)
- "Audio reduction"
- "TMC" menu item (list of messages)
- Clock symbol menu item (only visible during navigation when navigation active (voice output last message)
- "Destination" menu item
- "Continue/abort navigation"
- "Enter address"
- "From memory"
- "Recent destinations"
- "Point of interest"
- "In vicinity of destination"
- "Current position"
- "Different town"
- "Find with name"
- "Find with telephone number"
- "Stopover"
- "Mercedes-Benz Service"
- "Hospital"
- "Filling stations"
- "Parking lot"
- "Restaurant"
- "Other"
- "Save destination"
- "Save without name"
- "Save with name"
- "Assign address book entry"
- "Save as "Own address"
"TEL" menu
The following two variants are available:
- Basic telephony (without code (386) Mobile phone)
- Comfort telephony (with code (386) Mobile phone)
The Telephone (Tel) menu can be activated with the "TEL" hardkey. The default screen appears. The following are shown on the audio/COMAND display:
- Status bar
- Name of network provider, field strength of mobile telephone network, readiness indicator (telephone call active or not) or envelope symbol (for Short Message Service (SMS), with code (386) Mobile phone)
- Application field
- Symbol representing a mobile phone keypad and speller with characters for entering call numbers
- Function bar ("Telephone", "Name", "SMS" (with code (386) Mobile phone) and "Call lists")
The associated submenus can be called in the following menu items:
- "Telephone" menu item
- "Bluetooth telephone"
- "Address book"
- "Name" menu item
- "SMS" menu item (with code (386) Mobile phone)
- "Call lists" menu item
Bluetooth-capable devices can only be connected to the radio with Auto-Pilot system if they support hands-free profile (HFP) 1.0 or 1.5.
The entries in the telephone book on the mobile phone can be transferred to the radio only by means of "vCards".
System settings, model 204.0/2
The system settings can be activated with the "SYS" hardkey. The default screen appears. The following are shown on the audio/ COMAND display:
- Status lines no display)
- Application field (symbol for wrench and screwdriver)
- Function bar ("System" and "Language (Lang.)")
In the following menu items, the corresponding bar and status displays can be called on the audio/COMAND display:
- "System" menu item
- "Display"
- "Brightness" (0 to 10)
- "Day design"
- "Night design"
- "Automatic"
- "Time"
- "Set time"
- "Format"
- "DD.MM.YY"
- "MM.DD.YYYY"
- "YY/MM/DD"
- "HH:MM (24 hours)"
- "HH:AM (AM/PM)"
- "Time zone" (national selection)
- "Voice input/output"
- "Linguatronic"
- "Help window"
- "Further training"
- "Erase further training"
- "Reading speed"
- "Slow"
- "Medium"
- "High"
- "Bluetooth"
- "Bluetooth device list"
- "Activate Bluetooth"
- "Reset " (reset to manufacturer's default settings)
- "Language (Lang.)" menu item (Selection of system language)
System settings, mode 204.9
The system settings can be activated with the "SYS" hardkey. The default screen appears. The following are shown on the audio/ COMAND display:
- Status lines no display)
- Application field (symbol for wrench and screwdriver)
- Function bar ("System" and "Display Off")
In the following menu items, the corresponding bar and status displays can be called on the audio/COMAND display:
- "System" menu item
- "Display"
- "Brightness" (0 to 10)
- "Day design"
- "Night design"
- "Automatic"
- "Time"
- "Set time"
- "Format"
- "DD.MM.YY"
- "MM.DD.YYYY"
- "YY/MM/DD"
- "HH:MM (24 hours)"
- "HH:AM (AM/PM)"
- "Time zone" (national selection)
- "Voice input/output"
- "Linguatronic"
- "Help window"
- "Further training"
- "Erase further training"
- "Reading speed"
- "Slow"
- "Medium"
- "High"
- "Language (Lang.)"
- Selection of available system languages
- "Bluetooth"
- "Bluetooth device list"
- "Activate Bluetooth"
- "Reset " (reset to manufacturer's default settings)
- Menu item "Display off"
The audio/COMAND display can be switched back on by pressing one of the buttons on the radio with Auto-Pilot system.
Sound settings
The Tone menu can be activated by selecting the "Tone" menu item in the current menu. The default screen appears. The following are shown on the audio/COMAND display:
- Status lines no display)
- Application field (bar or status displays for current settings (-10 to +10))
- Function bar ("Treble", "Bass", "Bal/Fad" and "Tone" (with code (810) Sound system))
In the following menu items, the corresponding bar and status displays can be called on the audio/COMAND display:
- "Treble"
- "Bass"
- "Bal/Fad"
- "Tone" (with code (810) Sound system)