Procedures

AR33.10-P-0100-06SX Disconnect/connect front axle multiple circuit junction connector

Component Identification:

1 Press spring detent onto distributor (arrow) and
^ Connector of left front rpm sensor and right front rpm sensor (L6/1, L6/2)
^ Pull left, right front axle damping valve unit connector (Y51x1, Y52x1) (vehicles without Active Body Control (ABC) code 487)
out of distributor.

Component Identification:

2 When replacing the left, right front rpm sensor (L6/1, L6/2):

Unclip the electrical feed line (4) of the front left and front right speed sensor (L6/1, L6/2) from the brackets (5, 6) on the spring control arm, steering knuckle and longitudinal member.

Component Identification:

3 Unlock right front brake pad contact sensor connector (S10/2x1) of the right front brake pad contact sensor (S10/2) with screwdriver (01).
4 Press notch (2a) in the direction of the arrow and detach right front brake pad contact sensor connector (S10/2) downwards from bracket (3).
5 Unclip electric feed line of right front brake pad contact sensor (S10/2) from the wiring.