AZ82.70-P-0005-02QQB Retrofit Hands-Free System Wiring Harness

AZ82.70-P-0005-02QQB Retrofit Hands-Free System Wiring Harness
- with CODE (354) CTEL antenna (GSM 900 and 1800 MHz)


With radio

1 Expose connector for telephone handset (A34) in radio shaft.
2 Connect antenna for telephone handset (A34) to antenna line of PSC adapter.

Use provided antenna adapter if necessary (depending on vehicle version).







3 Attach VDA connecting cable (5) to hands-free system interface box (3).







4 Route connecting cable (5) from hands-free system interface box (3) to exposed CTEL separation point (X39/37) in radio recess as shown in figure and connect.

Fasten cable in place using adhesive felt.







5 Detach standard coupling chamber A and B from radio and attach to power supply wiring harness (20). Attach intermediate coupling of wiring harness (20) to radio.

VDA connecting cable (5) is attached to power supply wiring harness (20).







6 Prepare CAN wiring harness (4) as shown in figure.

Component Identification:

7 Attach CAN wiring harness (4) to ICANI box (2) and connect ICANI connector (7) to free coupling on hands-free system interface box (3).
8 Route CAN wiring harness (4) to radio and fix in position with adhesive felt.







9 Detach standard coupling chamber C from radio (A2) and attach to plug (11) of CAN wiring harness (4). Attach radio intermediate coupling (A2) of CAN wiring harness (4) to radio.







10 Connect microphone wiring harness (22) to connector coupling (MIC) in radio recess, route beneath glove box to right A-pillar and then upwards to headliner, fixing in position with adhesive felt.

In vehicles with head airbag, when routing it must be ensured at the top of the A-pillar that wiring harness is routed in front of head airbag tensioning strap (towards windshield).







11 Glue microphone (6) to mirror base with double-sided adhesive tape (included in parts kit) as shown in figure and connect.

Align microphone so that pickup opening points towards driver.

Component Identification:

12 Connect handsfree loudspeaker (21) to plug and route to front passenger knee bolster cover. Fit loudspeaker in prepared location.

Install using commercially available screws.