AR68.20-P-2000Q Remove/Install Center Console

AR68.20-P-2000Q Remove/Install Center Console
- except CODE (P98) Black Series












DANGER!
Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury clothing through burns to skin and eyes from battery acid or when handling damaged lead-acid batteries
- No fire, sparks, naked flames or smoking.
- Wear protective gloves, acid-resistant clothing and safety glasses. Pour battery electrolyte only into suitable and appropriately marked containers.

1 Disconnect ground cable of battery

CAUTION!
- Do not connect quiescent current retention device otherwise this may cause damage to the control modules.

2 Remove ashtray housing (3) from front center console (1)
3 Position center armrest (2) vertically
4 Remove carpet insert in stowage compartment
5 Remove screws (4).
6 Unclip side covers (5) in ashtray housing tunnel (3), remove
7 Turn screws (6) for arresting pins approx. 1/2 turn

NOTE: Left and right side

8.1 Disconnect connector from portable cellular telephone separation point (X39/37)
- With code (853) MB standard telephone
- With code (854) MB portable cellular telephone
9.1 Loosen antenna line separation point (8)
- With code (853) MB standard telephone
- With code (854) MB portable cellular telephone
10 Remove center console (1) toward rear

NOTE: Lift center console (1) at rear.

11 Reinstall in opposite order
12 Perform basic programming
13 Read diagnostic trouble code memory and erase
14 Check for proper function