AR47.10-P-4001P Draining and Filling Fuel Tank
AR47.10-P-4001P Draining and Filling Fuel Tank
Shown On Engine 112 In Model 203:
Remove
1.1 Take off top engine trim panels
1.2 Remove engine trim panel with integrated air cleaner.
NOTE: Detach engine cover or air cleaner by lifting vertically up and off the cylinder head covers.
2 Remove rear seat cushion
- With code (287a) through-loading feature
NOTE: Fold rear seat cushion only forward.
Draining
DANGER:
- Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from contact with fuel.
- No fire, sparks, naked flames or smoking.
- Pour fuels only into suitable and appropriately marked containers.
- Wear protective clothing when handling fuel.
3 Connect extraction hose (1) to extraction pump (2) on the suction side
CAUTION: Ground extraction pump (2), in order to prevent arcing.
- See Commercially Available Tools below.
DANGER:
- Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from contact with fuel.
- No fire, sparks, naked flames or smoking.
- Pour fuels only into suitable and appropriately marked containers.
- Wear protective clothing when handling fuel.
4 Pump out fuel into a safety tank (3)
- If fuel pump is intact.
CAUTION: Except engine 271.942, because the high pressure pump could be damaged on this engine. Proceed as if fuel pump would be defective.
- If fuel pump is defective.
Install
5 Install rear seat cushion
- With code (287a) through-loading feature
NOTE: Fold rear seat cushion only back.
6.1 Install top engine trim panels
6.2 Install engine trim panel with integrated air cleaner
NOTE: Position engine cover first at hot film cleaner mass air flow sensor, and then press down on cylinder head covers.
Filling
7 Fill fuel tank through tank filler opening
- Fuel tank capacity, Total capacity = 62 Liters
Reserve capacity = 8 Liters
8 Inspect fuel system for leaks
Commercially Available Tools:
