AR35.31-P-0550-10PA Removing Tapered Roller Bearing Inner Race From Drive Pinion

AR35.31-P-0550-10PA Removing tapered roller bearing inner race from drive pinion
- Rear axle center assembly dia. 185, 198, 210

Special Tools:

Component Identification:

1 Assemble puller (024) with extension (024c) and clamping pliers (024a) and tighten.

If necessary, use an open end wrench to fit and remove the extension (024c).

Component Identification:

2 Slide puller (024) with clamping pliers (0244) over tapered roller bearing inner race and clamp securely behind rollers (arrow) using spring pin (024b).
3 Using puller (024), pull tapered roller bearing inner race off drive pinion (47) and remove.