GF82.30-P-3006Q Windshield Touch Wipe, Function

GF82.30-P-3006Q Windshield Touch Wipe, Function

Component Identification:

Function prerequisites:
^ Circuit 15R ON

Function
Touch wipe has priority over intermittent wipe. With one-touch wiping together with the mode selection "Intermittent", the intermittent period is restarted after one-touch wiping has finished. One-touch wiping is not recognized during stage 1 or stage 2 wiping.

By briefly pressing the combination switch (S4), a single wipe is performed, when pressing for longer the wiping continues in accordance with the duration that the switch is actuated. With one-touch wiping, there is no actuation of the windshield washer fluid pump.
The front SAM control module with fuse and relay module (N10/1) receives the one-touch wiping request message from the steering column module (N80) via CAN class B.