AZ82.60-P-0015-02TYA Retrofit Rear Entertainment Wiring Harness

AZ82.60-P-0015-02TYA Retrofit Rear Entertainment Wiring Harness
- MODEL 219.3## 1#
- except CODE (242) Electrically adjustable front passenger seat with memory
- except CODE (275) Memory package (driver seat, steering column, mirrors)

Routing diagram






1 Video control unit
3 Screen
5 Fuse carrier

Connection scheme






1 Video control unit
3 Screen
5 Fuse carrier
6 Wiring harness (screen)
9 Wiring harness (video)
24 Black 4-pin coupling
25 Black 4-pin plug
X55/4 Right front seat contacting strip

Ensure that the wiring harnesses are not damaged by chafing or being trapped otherwise the appropriate wiring harness must be replaced.
The following operation steps are shown on the right side of the vehicle and can be accomplished analogously on the left side of the vehicle.






1 Route wiring harness (6) from previously created opening in backrest to video control unit (1).
The video control unit (1) is only placed in the seat and is fastened at a later point.

2 Connect wiring harness (6) to video control unit (1).
The white 12-pin coupling (6.1) is connected at a later point. The connections at video control unit (1) are coded and cannot be swapped.

3 Fasten wiring harness (6) at seat frame using cable ties.
4 Strap down excess length of line from wiring harness (6) using cable ties.






5 Route wiring harness (9) from video control unit (1) to right front seat connector block.
6 Connect wiring harness (9) to video control unit (1).
The connections at video control unit (1) are coded and cannot be swapped.

7 Fasten wiring harness (9) at seat frame using cable ties.
Take care that the adjustment mechanism of the seat is not impaired by the installation of lines, as this may lead to shearing or crushing of the wiring harness (9).






8 Detach and disconnect right front seat connector block (X55/4).
9 Connect black, 4-pin coupling (9.1) and black, 4-pin plug (9.2) of video wiring harness (9) to detached connector block for right front seat (X55/4).
The black 4-pin coupling (9.1) and the black 4-pin connector (9.2) are coded and cannot be swapped.






10 Connect assembled connectors and fuse carrier at the carrier (33).
The fuse rating is 5 A.

11 Fasten wiring harness with cable ties.