AR35.31-P-0520-06TX Drain Oil From Rear Axle Center Assembly

AR35.31-P-0520-06TX Drain oil from rear axle center assembly
- Rear axle center assembly dia. 198, 200, 215 in.

Rear axle center assembly housing:

Repair materials:

Component Identification:

1 Clean the area around the oil drain screw (50h).
2 Remove oil drain screw (50h).

Replace oil drain screw (50h).

Shown on 198 mm dia. rear axle center assembly





3 Apply Loctite(R) 7063 cleaning spray to a rag and clean the new oil drain screw and tapped hole in the rear axle center assembly.

The oil drain screw and tapped hole must be free of oil and grease.

4 Apply about one droplet of Omnifit(R) 100H sealing compound on the second or third lower thread.
5 Immediately screw oil drain screw into rear axle center assembly and tighten.