A/T, M/T - Flywheel/Flexplate Replacement Information
Date: January 28, 2009Order No.: S-B-03.30/11
Supersedes:
Group: 03
SUBJECT:
MY- All, Models All with Engine 272 with Transmission 722.6/9, Engine 273 with Transmission 722.9, Engine 272 with Transmission 722.6
Flywheel/Flexplate Replacement Procedure
The following must be observed when replacing the flywheel/flexplate in vehicles with engine 272 and transmission 722, as well as vehicles with engine 273 and transmission 722.
Flywheel/Flexplate Replacement Procedure
1. Spacer washer A 273 032 00 52 must be installed between the new flywheel/flexplate A 273 030 03 12 and the crankshaft.
2. Spacer plate A 112 032 02 52 must be installed between the bolt heads and the flywheel/flexplate.
NOTE:
The screw-in depth of bolts A 007 990 88 04 in the flywheel/flexplate plate may be insufficient due to unfavorable tolerances; and therefore, the torque converter must be fastened to the new flywheel/flexplate using bolts N 007 984 010 036 and washers A 327 990 06 40.
This procedure is to be followed until further notice.
Parts Information