Audio System - 'Satellite Radio Unavailable' Message

SATELLITE RADIO NOT AVAILABLE AND "DEVICE UNAVAILABLE" DISPLAYING ON THE HEAD UNIT MAY CAUSE CURRENT DRAW

Topic Number LI82.60-P-046896

Version 3

Design Group 82.60 Radio, audio/video systems

Date 07-23-2009

Validity Model 164

Model 171

Model 211

Model 230

Model 251

Model 463

All Model Year 2009 Equipped with Satellite Radio HD Turner

Reason for change X164 (GL) model added

Reason for block

Complaint:

Head unit displays "device unavailable" when user switches to satellite radio with a possible battery current draw.

Cause:

Under-voltage condition with the vehicle itself can cause the satellite radio to go into bypass. The satellite radio operation can be recovered by a hard-reset to the receiver' however, this condition may reoccur.

Remedy:

Use DAS version 06/09 or newer and telematics CD # 171 827 40 59 ES2:0001 to update the revelent telematics components. The satellite Radio/HD Turner version will be 47/09.

Software update process:

1. Connect a battery charger and DAS, DAS must be connected at all times and throughout the update process.

2. DO NOT disconnect DAS at all during the update process, this can corrupt the flash and render the head unit's operation unrecoverable even if you perform a hard-reset on the head unit during software the update process

3. Start the telematics update by selecting COMAND > control unit adaptations > control module programming, follow while DAS is searching the telematics CD for the proper application software for Head unit such as DVD mechanism, bluetooth, navigation, voice control or for other telematics components such as sound amplifier, UCI, satellite radio/combi turner it may display this message "Software missing". This is normal.

Software update progress bar may not indicate the elapsed time/time remaining for the update. Even if the process bar does not seem to be changing, the update process is taking place in the background. Please be patient, do not interrupt the process and allow DAS to continue through until the process is complete and you are prompted by DAS to eject the telematics CD from the head unit.

4. During the update, the telematics system will reset (restart) a few times, this is normal.

5. After update is complete and SCN coding is carried out, delete DTCs and check for correct functionally

Telematics components bypass notes:

Telematics components are specified go into bypass (self protection) when sensing an under-voltage condition of 10.6 V or lower. Due to a software error in the satellite radio, it is more susceptible to go into bypass before any other telematics components even if the voltage supply to "the receiver is over the low voltage threshold. As a result a "device unavailable" message is displayed on the head unit.





Symptoms








Validity