AR82.10-P-4920T Remove/Install Taillamp

AR82.10-P-4920T Remove/Install Taillamp

Shown On Left Taillamp:

1 Disconnect ground cable of battery
2 Remove inner side paneling in load compartment

NOTE: When removing left taillamp (E3) remove left load compartment side inner paneling, and when removing right taillamp (E4) remove right load compartment side inner paneling.

3 Remove bass module speaker

NOTE: When removing right taillamp (E4).

4 Remove multicontour seat pneumatic pump (M40) or pneumatic pump for dynamic seat control (M40/1) from pump bracket and put to one side together with connected wires

NOTE: When removing left taillamp (E3).

5 Unscrew nuts (1)
6 Remove left taillamp (E3) or right taillamp (E4) from rear quarter panel until electrical connector (2) is accessible
7 Disconnect electrical connector (2) and remove left taillamp (E3) or right taillamp (E4)
8 Install in the reverse order