AR82.20-P-0113TA Remove/Install Rear Dome Lamp

AR82.20-P-0113TA Remove/Install Rear Dome Lamp
- with CODE (413) Panoramic sliding roof
- with CODE (419) Solar module for panoramic roof







1 Remove center overhead control panel control module (N70/2)
2 Push left rear dome lamp (E11/1) or right rear dome lamp (E11/2) from headliner(l) and lower slightly

See "Special Tools" given below.

NOTE: Installation: Insert guide (7) in mount (5) and ensure that latching hooks (8) engage in journals (4)

3 Feed in ribbon cable (3)

NOTE: Do not damage ribbon cable

4 Disconnect electrical connector (6) from left rear dome lamp (E11/1)
- Only when removing left rear dome lamp (E11/1)

CAUTION: Do not twist left rear dome lamp (E11/1) otherwise the ribbon cable to the electrical connector (6) will be damaged

5 Remove left rear dome lamp (E11/1) or right rear dome lamp (E11/2)
6 Install in the reverse order
7 Perform function check

Special Tools

Mounting Wedge, P/N # 110 589 03 59 00: