GF82.90-P-0002-04LE Rear Entertainment, Operating Instructions
GF82.90-P-0002-04LE Rear Entertainment, Operating Instructions
- with CODE (864) Rear entertainment system
The operating instructions for the rear entertainment system are compiled as follows:
^ "ON/OFF" button on the left rear display (A40/5) or on the right rear display (A40/6)
^ Left screen button (N72/2s5) or right screen button (N72/2s4)
^ Rear rotary pushbutton (N72/2s8) on RCP [HBF] control unit (N72/2)
^ Left "Back" button (N72/2s7) or right "Back" button (N72/2s6)
^ Screen layout
^ Operating the disc applications
^ Operating the TV application (with code (863) Digital/analog TV tuner or code (529) HIGH Class Japan)
^ Operating the AUX application
^ System settings
^ Multi user
ON/OFF button on the rear display
When the "ON/OFF" button on the rear display is pressed, the corporate identity screen is displayed first for approx. 6 s. Then the last rear entertainment application called up on the particular rear display is started. The application used last is stored when the particular rear display is switched off.
Screen button
The left screen button activates the left rear display for menu guidance and the right screen button activates the right rear display for menu guidance.
Rear rotary pushbutton on RCP [HBF] control unit
The menus or menu items displayed on the particular rear display can be selected using the rear rotary pushbutton on the RCP [HBF] control unit.
To this end, the rear rotary pushbutton can be actuated in the following ways:
- Turn to the left or right
- Push to the front, rear, left or right
- Press down vertically
In order to move within a menu bar (status bar, application bar, application field, function bar or system setting), the rear rotary pushbutton is turned or pushed to the left or right. The rear rotary pushbutton is pressed down vertically in order to select a menu or menu item in the particular menu bar or confirm a setting. The rear rotary pushbutton is pushed forward (line above) or to the rear (line below) in order to change the menu bar.
Button "Back"
The next menu level up is accessed using the left "Back" button or the right "Back" button.
Screen layout
The screen of the particular rear display is divided into the 5 areas listed below (from top to bottom):
- Status bar
- Application bar ("Disc", "TV" (with code (863) Digital/analog TV tuner or code (529) HIGH Class Japan), "AUX1", "AUX2")
- Application field
- Function bar (subfunctions depending on application)
- System settings ("Display", "Language", "Speakers")
Operating the disc applications
If the "Disc" menu item is activated, the screen relating to the application appears on the particular rear display. A distinction is made here between the following media types:
^ Audio or MP3-CD
^ Video or MP3-DVD
Audio or MP3-CD
If an audio or MP3-CD is in the DVD drive of the DVD player (A40/4), the corresponding screen is displayed when the "Disc" menu item is activated.
The following information is displayed in the application field of the particular rear display:
- Number of current title
- Elapsed time of the current track
- Number of tracks on the CD
- Playback mode
In addition, the following actions are also possible:
^ Setting options via the function bar
^ Track selection using skip function
^ Fast Forward or Rewind
Setting options via the function bar
- "CD":
- Playback mode ("Normal track sequence", "Track mix")
- "Track list":
- List for directly selecting tracks (e.g. track 1 or track 2, etc.)
Title selection using skip function
Turning or pushing the rear rotary pushbutton to the left will play the track that is before the current track in the track list. Turning or pushing the rear rotary pushbutton to the right will play the track after the current track.
Fast Forward or Rewind
The playback position can be changed by pushing and holding the rear rotary pushbutton to the right (forward) or left (back).
Video or MP3-DVD
If a video or MP3-DVD is in the DVD drive of the DVD player, the corresponding screen is displayed when the "Disc" menu item is activated.
The DVD video picture is displayed in the application field of the particular rear display.
In addition, the following actions are also possible:
^ Setting options via the function bar
^ Chapter selection using skip function
^ Fast Forward or Rewind
^ Full screen
Setting options via the function bar
- "DVD-V":
- Settings menu ("DVD functions", "Brightness", "Contrast", "Color", "16:9 optimized", "4:3" or "Wide screen")
- Pause:
Temporarily interrupts playback, the current position is stored and the menu item changes to "Play"
- Stop:
- Stops playback
Chapter selection using skip function
Turning or pushing the rear rotary pushbutton to the left will play the chapter that is before the current chapter in the chapter list. Turning or pushing the rear rotary pushbutton to the right will play the chapter after the current chapter.
Fast Forward or Rewind
The playback position can be changed by pushing and holding the rear rotary pushbutton to the right (forward) or left (back).
Full screen
If the slider is in the application field, the "Full screen" option can be selected. Selecting this option causes the menu bars to be hidden and the video image to fill the entire screen. Full-screen mode is deactivated by pressing the rear rotary pushbutton down vertically. The hidden menu bars are shown again immediately and the video image is now displayed only in the application field.
Operating the TV application (with code (863) Digital/analog
TV tuner or code (529) HIGH Class Japan)
If the "TV" menu item has been activated and the TV combination tuner (analog/digital) (A90/1) (with code (863) Digital/analog TV tuner) or the TV tuner that is integrated into the COMAND controller unit (A40/3) (with code (529) HIGH Class Japan) is ready, the corresponding screen appears.
The TV picture is displayed in the application field.
In addition, the following actions are also possible:
^ Setting options via the function bar
^ Full screen
Setting options via the function bar
- "TV":
- Settings menu ("Brightness", "Contrast", "Color", "16:9 optimized", "4:3" or "Wide screen")
Full screen
If the slider is in the application field, the "Full screen" option can be selected. Selecting this option causes the menu bars to be hidden and the TV image to fill the entire screen on the corresponding rear display. Full-screen mode is deactivated by pressing the rear rotary pushbutton down vertically. The menu bars are shown again immediately and the video image is now displayed only in the application field.
Operating the AUX application
From the application bar it is possible to operate two devices connected to the DVD player. The devices at the AUX inputs are recognized automatically. The relevant screen is displayed, depending on whether a device with video or audio output is detected. The respective connected device is, however, not controlled by the DVD player but by the actual device connected at the AUX input. A distinction is made here between the following device types:
^ Video equipment
^ Audio equipment
Video equipment
If video equipment is recognized at the AUX input, the video picture received is displayed in full-screen mode on the particular rear display. Pressing the rear rotary pushbutton down vertically ends full-screen mode. The corresponding screen appears.
Using the menu item in the function bar it is possible to modify the following audio and video settings:
- "AUX":
- Settings ("Brightness", "Contrast", "Color", "16:9 optimized", "4:3" or "Wide screen")
Audio equipment
If audio equipment is recognized at the AUX input, the corresponding screen appears.
Using the menu item in the function bar it is possible to modify the following settings:
- "AUX":
- No settings possible
System settings
In the system settings it is possible to make changes in the following menu items:
^ "Display"
^ "Language"
^ "Speakers" (with code (810) Sound system)
"Display"
The "Display" menu item offers the following options for the particular rear display:
- "Display off"
- "Day screen"
- "Night screen"
- "Automatic"
"Language"
The system language is selected in the "Language" menu item.
"Speakers" (with code (810) Sound system)
The audio tuner control unit (N93/1) outputs the audio signals over the speaker system via direct lines as a function of the volume set at the COMAND controller unit. From the "Speakers" menu item it is possible to select whether the analog audio signals of the rear display are to be audible over the speaker system.
This option is only available if both rear displays are switched on. If just one rear display is switched on, the analog audio signal of this rear display is output automatically.
Multi user
If both rear displays are in use, a distinction is made between one active and one passive side. Active in this case means that the menu can be operated using the rear rotary pushbutton.
If, for example, the right rear display is active, then the user on the left rear side must first activate his/her left rear display to be able to change any settings. The right rear display or the left rear display can be activated using the left screen button or the right screen button on the RCP [HBF] control unit.