Procedures

AR54.30-P-1000-02ESX Perform Adjustments to the Control System
Deactivate/activate easy entry/exit feature
- with CODE (275) Memory package (driver seat, steering column, mirrors)





1 Insert key into EIS [EZS] control unit (N73).
2 Turn the turn/push control (A40/9s11) until the basic menu "Vehicle" is shown against a highlighter bar in the COMAND display (A40/8).
3 Confirm the selection by pressing the turn/push control (A40/9s11).
4 Turn the turn/push control (A40/9s11) until the menu item "Easy entry/exit" appears in bold.
5 Confirm the selection by pressing the turn/push control (A40/9s11).
6 Note the option of easy entry/exit chosen by the customer.
7 Turn the turn/push control (A40/9s11) until in the selection list "off" is shown against a highlighter bar.
8 Confirm the selection by pressing the turn/push control (A40/9s11).
9 At the conclusion of the work set the option of easy entry/ exit again chosen by the customer.