GF80.20-P-2002LE Operating Central Locking With Transmitter Key, Function
GF80.20-P-2002LE Operating Central Locking With Transmitter Key, Function
General function requirements
^ C. 15C OFF
Central locking (CL), operation with transmitter key (A8/1) function, general
The CL can be operated with the transmitter key.
The operation with the transmitter key comprises the following partial functions:
^ Function sequence for presetting global and selective unlocking
^ Function sequence for locking or unlocking
^ Function sequence for visual feedback (without code (494) USA version)
^ Function sequence for trunk lid remote opening
^ Function sequence for mechanical trunk lid locking (with code (494) USA version)
Function sequence for presetting global and selective unlocking
If the unlock and lock buttons on the transmitter key are pressed simultaneously for t = 5 seconds, a change between the "global" and "selective" settings takes place. The indicator lamp on the transmitter key comes on for confirmation.
- Global unlocking
The entire vehicle is unlocked by pressing the "Unlock" button on the transmitter key (doors, trunk lid and fuel filler flap).
- Selective unlocking
Only the driver door and the fuel filler flap are unlocked when the "Unlock" button on the transmitter key is pressed. Only the next actuation of the "Unlock" transmit button unlocks the entire vehicle.
Function sequence for locking or unlocking
When the "Lock or unlock" button the transmitter key is actuated, it transmits a radio signal via the rear window antenna amplifier module (A2/12) to the rear SAM control unit with fuse and relay module (N10/2). The EIS control unit (N73) receives the signal from the SAM control unit via the interior CAN. Parallel to the radio signal, an infrared signal is transmitted driver door infrared sensor (B58) (precise aiming required). This signal is read in by the left door control unit (N69/1) (on model 216) or left front door control unit (N69/1) (on model 221) and transmitted to the EIS control unit via the interior CAN.
The infrared and radio signals contain the same information (redundant). The first signal received always has priority.
In both cases, the EIS control unit checks the access authorization of the transmitter key.
If the access authorization is valid, the EIS control unit transmits the command "Lock or unlock" via the interior CAN to the following control units:
Model 221:
- Left front door control unit
- Left front door lock unit actuation (A85)
- Right front door control unit (N69/2)
- Right front door lock unit actuation (A85/1)
- left rear door control unit (N69/3)
- Left rear door lock unit actuation (A85/3)
- Right rear door control unit (N69/4)
- Right rear front door lock unit actuation(A85/4)
- Rear SAM control unit
- Trunk lid CL motor actuation (M14/7)
- Fuel filler flap CL motor actuation (M14/10)
Model 216:
- Left door control unit
- Left door lock unit actuation (A85)
- Right door control unit (N69/2)
- Right door lock unit actuation (A85/1)
- Rear SAM control unit
- Trunk lid CL motor actuation
- Fuel filler flap CL motor actuation
Moreover, the rear SAM control unit enables or disables the opening request from the trunk lid external switch (S88/8).
If the driver door is opened during locking, the driver door is not locked An open passenger door is locked When the vehicle is unlocked, the interior illumination (IBL) is switched on with the soft-on feature by the overhead control panel control unit (N70).
Function sequence for visual feedback
After successful locking or unlocking, the turn signal lamps flash as visual feedback. The function is controlled by the rear SAM control unit, transmitting the turn signal as blinkmaster with the interior CAN:
- Locking: flashes three times
- Unlocking: flashes once
For further information on visual feedback see separate function description on exterior lights.
If a door is still open when locking, there is no visual feedback.
Function sequence for trunk lid remote opening
When the "Remote trunk release" is actuated, the transmitter key transmits the corresponding signal. The data flow is the same as described previously for "Locking or unlocking".
However, only the trunk lid CL motor is actuated by the rear SAM control unit to unlock the trunk lid. The remaining CL remains deactivated.
After closing, the trunk lid it is relocked
Function sequence for mechanical trunk lid locking
The trunk lid can be secured mechanically by locking with the emergency key. The position of the trunk lid is relayed to the rear SAM control unit by the trunk lid contact switch (S88/6). The opening request from the rear SAM control unit is enabled or disabled according to the position.
