Restraints - Seat Belts Don't Retract Properly

Date: March 19, 2009

Order No.: S-B-91.40/130a

Supersedes: P-B-91.40/130 and T-B-91.40/131 dated October 11, 2006

Group: 91

Revision History

Revision Date Purpose

a 3/19/09 Parts Information Updated

- 10/11/06 Initial issue

SUBJECT:
All Model 164, 171, 203, 209, 211, 219, 220, 221, 230 and 251

Seat Belt Does Not Roll Up Correctly

If you receive customer reports in the above model vehicles of the front or rear seat belts not rolling up fully, the cause could be dirt deposits on the seat belt guide due to a soiled seat belt. Cleaning the belt guide and seat belt should restore proper function of the seat belt retraction.

To resolve, perform the following.








1. Clean the belt guide using MB Plastic Cleaner (Figures 1 and 2).

2. Clean the seat belts using MB Car Shampoo mixed with water, MB Textile Carpet/Fabric Care or clean, lukewarm water and soap. Do not treat the belt with any other cleaning agents.

3. Extend belt and allow to air dry. Do not dry at temperatures above 175°F (80°C) or in direct sunlight. Do not bleach or dye.

Note:
If these instructions are not followed, proper retraction of the seat belt may be impaired.

Note:
This repair cannot be claimed under warranty.





Parts Information