Restraints - Seat Belt/Head Rest Comfort Feature Inop.

Date: January 9, 2009

Order No.: P-B-91.40/115a

Supersedes: P-B-91.40/115 dated Sept. 13, 2006

Group: 91

Revision History

Revision Date Purpose

a 1/9/09 Applicable Models and Damage Code Updated

- 9/13/06 Initial issue

SUBJECT:
Model 221.171/176/177/179/186 (with Option Code 223 or 223+224)

Rear Seat Belt Comfort Fit and/or Head Restraint Raising Mechanism Not Functioning When Fastening Seat Belt

If you receive customer reports in the above model vehicles of the rear seat belt comfort fit and/or head restraint raising mechanism not functioning when fastening seat belt, the wiring from the buckle may be damaged. To resolve, perform the following procedure.

1. Remove seat belt buckle. Refer to WIS document AR91.40-P-1516SX.





2. Secure the wiring on the replacement buckle using fabric tape as shown in (Figure 1).

3. Install in reverse order.

Note:
The wiring has been secured in production from December 2005.

Note:
Verify part application in EPC by VIN)





Parts Information

Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on January 9, 2009. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.





In Case of Warranty, use the table above.