The torque request from control module N15/3 (ETC [EGS] control unit) is implausible. (P0702)

The torque request from control module N15/3 (ETC [EGS] control unit) is implausible. (P0702)


Possible cause:

- N15/3 (ETC [EGS] control unit)
Affected functions:

- Engine diagnosis
- Automatic transmission Function

-------------------------------------------------

Test 1: Check component N15/3 (ETC [EGS] control unit).

1. Check component N15/3 (ETC [EGS] control unit).
NOTEProcess fault codes in control unit ETC.Do you want to switch over to control unit ETC?

YES

1. No further information available.


NO

1. No further information available.