GF91.25-P-2014TX Position Storing of Dynamic Seat With Memory, Function

GF91.25-P-2014TX Position Storing Of Dynamic Seat With Memory, Function
- with CODE (433) Left dynamic seat including multicontour seat
- with CODE (434) Right dynamic seat including multicontour seat

Component Identification:

Requirements
^ No undervoltage or overvoltage
^ Circuit 15R "ON"
^ circuit 15 "On"
^ no excess temperature or leakage faults

Function
The positions of the driver's seat can be stored key-related, the positions of the front passenger's seat are not stored key-related. The seat cushion contour (pressure values of all cushions) manually adjusted using the left front multicontour backrest switch group (S109) or right front multicontour backrest switch group (S108), is saved in a nonvolatile memory when the memory switch and the position keys on the memory button 1, 2, 3 switch are pressed.

The stored seat contour can be restored again accordingly at a later point in time by actuating one of the position keys on the memory button 1, 2, 3 switch.

Exceeding the stored values is possible at any time. Cushion contours are not stored at the plant (cushions on minimal pressure). An adjusted cushion contour can be stored during dynamic lumbar support. The currently adjusted cushion contour is stored. The lumbar support program is not interrupted. A memory request using a position key of the memory button 1, 2, 3 switch during the "dynamic lumbar support" function leads to an abort of this functions. Then the requested memory position is moved to. The "dynamic lumbar support" function is only executed after a repeated request.