Drive/Propeller Shaft
Testing and Inspection- AP41.10-P-4152TX Check Propeller Shaft Flex Disks For Signs of Damage and Deformation
- AR41.10-P-0086TX Measure Propeller Shaft Alignment With Electronic Propeller Shaft Inclinometer
- AR41.10-P-0085-01PA Measure Absolute Angle at Transmission
- AR41.10-P-0085-02T Measure Absolute Angle at Front and Rear Propeller Shafts
- AR41.10-P-0085-03T Measure Absolute Angle at Rear Axle Housing
- AR41.10-P-0086-02P Prepare Electronic Propeller Shaft Inclinometer
Service and Repair- Procedures
- AR41.10-P-0086-05T Correcting Rear Articulation Angle at Rear Axle Center Assembly
- AR41.10-P-0050-05TX Connect Sections of Propeller Shaft
- AR41.10-P-0050-09TX Release Fitting Sleeves on Flex Disks
- AR41.10-P-0085-01PA Measure Absolute Angle at Transmission
- AR41.10-P-0085-02T Measure Absolute Angle at Front and Rear Propeller Shafts
- AR41.10-P-0085-03T Measure Absolute Angle at Rear Axle Housing
- AR41.10-P-0086-01R Read Out Propeller Shaft Inclination Angles From Memory; Correct If Necessary
- AR41.10-P-0086-02P Prepare Electronic Propeller Shaft Inclinometer
- AR41.10-P-0086-03T Correcting Front Inclination Angle at Transmission
- AR41.10-P-0086-04T Correcting Center Articulation Angle at Propeller Shaft Intermediate Bearing
- AR41.10-P-0200-03TX Press In Guide Sleeve
- Removal and Replacement
- Procedures
Specifications