AN82.60-P-0016-01FH Retrofit Media Interface Control Unit

AN82.60-P-0016-01FH Retrofit Media Interface Control Unit
- MODEL 204.0## /2## 1# as of 1.3.11, 204.3## 1#











1 Apply spray adhesive to contact surfaces of bracket (12).
The bonding surface must be free of dust and grease.

2 Position bracket (12) from crossmember (13) under the instrument panel and fasten in place using two cable ties (14).






3 Connect black 3-pin coupling (15) of voltage supply wiring harness (26) to media interface control unit (N125/1).






4 Insert media interface control unit (N125/1) with shackles (arrows B) into the fixtures (arrow C) of the bracket (12).
5 Position and clip in shackle (arrow A) of media interface control unit (N125/1) at catch hooks (arrows E) of bracket (12).