AR82.70-P-8952-02EW Cut Out Cover Using Cutting Wire

AR82.70-P-8952-02EW Cut Out Cover Using Cutting Wire






The cover (1) spacers for the multifunction antenna are destroyed when they are cut out.
The cover (1) must always be replaced.

1 Cut cutting wire 0.5 mm (2) to an approx. length of 50 cm and attach pull handles (3) to both ends of the cutting wire 0.5 mm (2).
Cutting wire
gotis://E_82_06.0
Pull handle
gotis://K_67.0_01.0

2 Place cutting wire 0.5 mm (2) to left around the adhesive bead of the cover (1) and cut adhesive material.
Move cutting wire 0.5 mm (2) upwards against the cover (1). Otherwise the paint may be damaged.

Shown on model 218






3 Place cutting wire 0.5 mm (2) to right around the adhesive bead of the cover (1) and cut adhesive material.
Move cutting wire 0.5 mm (2) upwards against the cover (1). Otherwise the paint may be damaged.

4 Remove cover (1).
The cover (1) can be removed by hand once the adhesive bead has been cut completely.

Shown on model 218