Windows - Front Windows Reverse Direction When Closing

Side windows of front doors reverse direction when closing

Topic number LI67.30-P-050613

Version 3

Design group 67.30 Side windows

Date 04-19-2012

Validity A) MODEL 212 up to VIN end number A519818

B) MODEL 212 up to VIN end number A668947

Reason for change Reformatted "procedure" in Remedy Section

Complaint:
A) The side windows in the front doors may intermittently reverse direction at low outside temperatures (<<5°C) in various intermediate positions when closing.

B) The side windows in the front doors may intermittently reverse direction when reaching the upper end position.

Cause:
The closing of the side windows has excessive resistance.

Remedy:

A.1) Replace and align side window (see WIS reference).

A.2) Replace window guide rail (see WIS reference).

B) Adapt power window parameters in left/right front DCU.

The parameters are available with add-on 2232 for XD Procedure:

1. Upload control unit log (for door specified door control module) and quick test to pSDS (paperless SDS).

2. Request password for special function "Adaptation of power window closing" via email (see below) from SDS User Help Desk.

- In email request, please include:

1. Dealer Code

2. Name

3. Phone #

4. VIN

5. Email Address

- Access Xentry Diagnosis => DCU-Fx => Adaptations => Configuration => Manual settings

=> Special functions "Adaptation of power window closing" => enter password => press "Continue" button.

Note:
Replacing the door control unit or power window motor does not remedy the problem!!





Symptoms





Parts





Work units





WIS-References