AN82.70-P-0001-02EC Retrofit Phone Bracket

AN82.70-P-0001-02EC Retrofit Phone Bracket

1 Connect 4-pin black coupling (2) of adapter line (1) to Bluetooth module (A34/7) (arrow A).
2 Clip Bluetooth module (A34/7) into bracket (4).
3 Route antenna line (3) and adapter line (1), as shown, in supports (arrows B) of bracket (4).
4 Screw Bluetooth module (A34/7) onto bracket (4) with screw/bolt (5).







5 Fold over and lock cover (4.1) of bracket (4).







6 Place bracket (4) with Bluetooth module (A34/7) in stowage compartment of center console (6).
7 Route antenna line (3) and adapter line (1) downward through opening (arrow C) in center console (6).







8 Position bracket (4) in center console (6) and clip catch hook (7) into cutouts (arrows D) in center console (6).

Ensure that the antenna line and the adapter line are not damaged by pinching or crushing.
The bracket (4) must be positioned in the rear area (arrow E) of the center console (6), as shown.

9 Clip in cover (8) at Bluetooth module (A34/7).







10 Guide antenna line (3) and adapter line (1) toward rear out of center console (6).
11 Connect violet connector of antenna line (3) with violet coupling of previously installed antenna line and slide foam sheath (9) over connector.
12 Connect white 4-pin coupling of adapter line (1) with white 4-pin connector of previously installed power supply wiring harness and slide foam sheath (9) over connector.