Operation CHARM: Car repair manuals for everyone.

AN82.70-P-0001-02EW Retrofit Phone Bracket



AN82.70-P-0001-02EW Retrofit Phone Bracket
- except CODE (279) Electronic gear selector

1 Connect 4-pin black coupling (10) of adapter line (4) to Bluetooth module (A34/7) (arrow A).
2 Clip Bluetooth module (A34/7) into bracket (3).
3 Route antenna line (11) and adapter line (4), as shown, in supports (arrows B) of bracket (3).
4 Screw Bluetooth module (A34/7) onto bracket (3) with screw/bolt (12).







5 Fold over and lock cover (3.1) of bracket (3).







6 Create passage (arrow C) in stowage compartment of center console (2).

The passage is pre-stamped in the stowage tray of the center console (2) and can be broken out.







7 Route antenna line (11) and adapter line (4) through opening created in center console (2) and place bracket (3) with Bluetooth module into stowage compartment of center console (2).







8 Position bracket (3) in stowage compartment of center console (2) and clip catch hook (3.2) into cutouts (arrows D) in center console (2).

Make sure that the antenna line and the adapter line are not damaged by pinching.
The bracket (3) must be positioned in the rear area (arrow E) of the center console (2), as shown.

9 Clip in cover (13) at Bluetooth module (A34/7).