GF54.10-P-2005LE DC/AC Converter Function

GF54.10-P-2005LE DC/AC Converter Function
- MODEL 221.0 /1
- with CODE (U80) 115 V socket
as of model year 2011/YoM 10

Function requirements, general
- Circuit 15R ON

The EIS [EZS] control unit (N73) makes the circuit status circuit 15 available via the interior CAN (CAN B).

DC/AC converter, general
The rear SAM control unit with fuse and relay module (N10/2) actuates the DC/AC converter control unit (N24/3) function. The insertion of a 115 V-consumer in the 115 V socket (X58/34) is detected via the socket microswitch (X58/34s1). The rear SAM control unit supplies the microswitch power outlet with power.
If a consumer is connected to the 115 V power outlet, this voltage is switched through to the control input for the DC/AC converter control unit. The DC/AC converter control unit converts the DC voltage of the on-board electrical system into a 115 V AC voltage. An LED integrated into the 115 V socket indicates the availability of AC voltage.
The maximum available continuous electrical load is P = 150 W. Only small electrical devices that require a 115 V AC voltage may be connected to the 115 V power outlet.
If the interior temperature of the DC/AC converter control unit rises above a defined limit value or if the output load exceeds the overload threshold of P = 150 W, the DC/AC converter control unit switches off.
A calculation method stored in the DC/AC converter control unit prevents the converter from constantly switching between on and off when it gets close to the respective limit value.
If an undervoltage is detected in the energy management, the DC/AC converter control unit is switched off and the power supply to the 115 V power outlet is interrupted.