AN82.70-P-0008-05SX Retrofit Bluetooth Module

AN82.70-P-0008-05SX Retrofit Bluetooth Module
- except CODE (582) Rear air conditioner


1 Connect black 4-pin coupling (2) of adapter line (4) to Bluetooth module (A34/7).
2 Insert Bluetooth module (A34/7) into paneling (3) and screw down using screw/bolt (1).







3 Connect white 4-pin coupling of adapter line (4) to white 4-pin connector (5) of the previously installed comfort telephony wiring harness (8).
4 Connect violet antenna line connector (6) of Bluetooth module (A34/7) to violet antenna line coupling (7) of the previously installed comfort telephony wiring harness (8).







5 Cut felt tape (9) to a length of approx. 100 mm and a width of approx. 70 mm.
6 Remove a strip of protective foil approx. 15 mm wide on the side of the felt tape (9) that is 100 mm long.
7 Place felt tape (9) tightly around the connector created using the comfort telephony wiring harness (8) and glue together.







8 Push back comfort telephony wiring harness into opening (arrow) in center console (10).
9 Insert paneling (3) with Bluetooth module (A34/7) into center console (10) and clip in.







10 Position lid (11) above center console (10) and screw down using screws/bolts (12).
11 Insert rubber damper above screws/bolts (12).