GF88.79-P-2006SX Passenger-Side Outside Mirror Park Position, Function

GF88.79-P-2006SX Passenger-side Outside Mirror Park Position, Function
- with CODE (275) Memory package (driver seat, steering column, mirrors)
- up to model year 08

Component Identification:

Function requirements
^ C. 15R On
^ Outside mirror adjustment switch in passenger mirror position
^ No manual mirror lens adjustment actuated or memory request active.
^ Function in COMMAND controller unit (A40/3) activated

Function
If the left front door control unit or right front door control unit receives the message "Reverse gear engaged", the right outside mirror is moved to park position stored for the transmitter key (A8/1).

Abort the function
The right outside mirror is automatically returned to the original position, when:
^ Reverse gear signal is not recognized after 10 s or
^ vehicle speed is greater than 10 km/h or
^ outside mirror adjustment selection switch is switched to driver mirror position.

The original position is resumed, even when the right outside mirror has been moved to the park position manually.If the right outside mirror is located in the park position with circuit 15 Off, it is returned after 0.6 s when circuit 15 is switched back on and the transmission is no longer shifted to reverse.If reverse gear is recognized with circuit 15 On, the mirror moves to the park position after 0.6 s.

Store park position

Function requirements
^ C. 15R On
^ Reverse gear engaged

First adjust desired position of the right outside mirror manually via the outside mirror adjustment rocker switch.
The park position is stored by the left front seat operation switch group.

When the memory switch is pressed momentarily and then the outside mirror adjustment switch in the passenger-side position is actuated within 3s, the momentary outside mirror position is stored as park position.
The request to store the park position is transmitted to the left door control unit and from there relayed to the right door control unit via the interior CAN.The position and storage data is stored in the right door control unit.